Guest Guide
AQUBT Ceiling Fan with Light
Guest-safe instructions for using the AQUBT low-profile ceiling fan and light remote, including wall switch power, 6 fan speeds, light on/off, brightness, color temperature, timer, and reverse airflow.
BedroomsGuestAQUBT 20-inch modern low profile ceiling fan with lightomluxeproperties.com/how-to/bedroom-fan-and-light
Operating Instructions
- Turn the wall light switch On first; the fan and light remote will not work if the wall switch is Off.
- Press the Light ON/OFF button on the remote to turn the LED light on or off after wall power is On.
- Press the Fan Speed button to move through the 6 fan speeds; start low and increase gradually.
- Press the Fan OFF button to stop airflow while leaving the light available.
- Press the Color Temperature button to cycle the light between warm, neutral, and cool white.
- When the light is on, press and hold the Light Dimming button to dim or brighten the light; release when it feels comfortable.
- Use the Timer buttons only if you want the fan and light to shut off automatically after the selected time, such as 1 hour, 4 hours, or 8 hours.
- Use Natural Wind only if you want the fan speed to vary automatically between low and high.
- Use the Reverse/Direction button only if airflow feels wrong for the season; the fan may slow down, stop, and restart in the opposite direction.
- Before leaving the room or checkout, turn the fan and light off with the remote and leave the remote visible in the room.
Have a problem?
- Remote does not control the fan or light
- Make sure the wall switch for that room is On.
- Try the Light ON/OFF button and Fan Speed button once each.
- Check that the remote batteries are seated if the remote indicator does not flash when a button is pressed.
- Contact your host if the wall switch is On and the remote still does not work.
- Light is too bright, too dim, or the color feels wrong
- Press the Color Temperature button to cycle warm, neutral, and cool white.
- With the light on, press and hold the Light Dimming button to dim or brighten; release when the brightness looks right.
- Press Light ON/OFF if you want the fan without the light.
- Fan speed is too strong or too weak
- Use the remote speed controls to lower or raise the fan speed.
- Give the fan a few seconds to settle after each speed change.
- Turn the fan off if it makes unusual noise or shakes.
- Remote is missing or batteries are dead
- Check the bedside table, dresser, and nearby shelves.
- Use the wall switch for basic power if the remote is missing.
- Contact your host for a replacement remote or batteries.
- Fan makes noise, rubs, or wobbles
- Turn the fan off with the remote.
- Do not keep running the fan if it wobbles or makes scraping sounds.
- Contact your host.