Guest Guide

Magnasonic Projection Alarm Clock

Guest-safe instructions for using the Magnasonic projection alarm clock, including alarms, projection, dimming, radio, and battery backup.

BedroomsGuestMagnasonic EAAC601 / EAAC601Womluxeproperties.com/how-to/bedroom-clock

Operating Instructions

Keep the clock plugged in; the battery is only a backup for saved settings during a power outage.
To dim the main screen at night, make sure the radio is off, then press the Time Zone/Snooze/Sleep/Dimmer button to cycle High, Low, and Off.
To turn the wall or ceiling projection on or off, press the Projection ON/OFF button on the back projection unit.
To aim the projection, gently swivel the projection unit toward a wall or ceiling; the clearest range is about 3 to 9 feet in a darkened room.
To sharpen the projected time or temperature, turn the small focus wheel on the back of the projection unit until the numbers are clear.
If the projection is upside down, press the 180-degree flip/projection button once to rotate the projected image.
To show temperature instead of time in the projection, press and hold the projection temperature button on the back projection unit.
To set Alarm 1 or Alarm 2, press the alarm button once to view it, then press and hold the same alarm button until the alarm time flashes.
Use the arrow buttons to choose hour, minute, alarm mode, wake option, and volume if radio is selected; press the same Alarm 1 or Alarm 2 button to confirm each option.
When an alarm is sounding, press AM/FM Power once to stop it for the day; press Snooze/Sleep only if you want a 9-minute snooze.
Before checkout, press and hold Alarm 1 and Alarm 2 until their alarm indicators disappear from the screen so the next guest is not woken up.

Have a problem?

Display or projection is too bright at night
1. Make sure the radio is off.
2. Press the Time Zone/Snooze/Sleep/Dimmer button to cycle the main screen through High, Low, and Off.
3. Press the Projection ON/OFF button on the back projection unit if you do not want time or temperature on the wall or ceiling.
4. Do not unplug the clock unless you need to reset it; unplugging can cause alarms/settings confusion.
Projected time is blurry, upside down, or aimed wrong
1. Press Projection ON/OFF on the back projection unit if the projection is off.
2. Gently swivel the projection unit toward a blank wall or ceiling.
3. Move the clock closer or farther if needed; the manual recommends about 3 to 9 feet for projection.
4. Turn the focus wheel on the back of the projection unit until the numbers look sharp.
5. Press the 180-degree flip/projection button once if the time appears upside down.
6. Press Projection ON/OFF again if you prefer no projected light at night.
Alarm goes off unexpectedly
1. Press AM/FM Power once to stop a sounding alarm for the day.
2. Press Snooze/Sleep only if you want the alarm to pause for 9 minutes and then sound again.
3. To completely disable Alarm 1 or Alarm 2, press and hold the matching Alarm 1 or Alarm 2 button until that alarm indicator disappears from the screen.
4. Before checkout, confirm both Alarm 1 and Alarm 2 indicators are off.
Radio or sleep timer is playing
1. Press AM/FM Power to turn the radio on or off.
2. Use the Sleep button only if you want the radio to turn off automatically after a set time.
3. If sound continues, press AM/FM Power once more.
Time or date is wrong
1. Leave the clock plugged in for a few minutes; it may auto-set after power is restored.
2. If needed, press and hold Set, then use arrow buttons and Set to confirm year, month, day, 12/24-hour mode, hour, and minute.
3. Contact your host if the clock will not hold the correct time.
Clock loses settings after being unplugged
1. Keep the clock plugged in during your stay.
2. Contact your host if the display resets or flashes after a power interruption.